Products

FinishOne 630.

This passivating and rinising agent removes all free iron from steel surfaces. Free iron is left on surfaces by operations such as blasting and grinding. If the free iron is not removed, the steel's passive chromium layer is compromised and corrosion resistance suffers. Safety and the environment were top priorities in the development of Avesta FinishOne(tm). This environmentally friendly spray creates minimal hazardous waste and is classifed as non-dangerous. Download data sheet

Rust Remover 410.

Superficial rust and lime deposits can occasionally appear on any stainless steel surface. Cleaning with Avesta OriginalFinish™ Rust Remover eliminates these spots with ease, restoring the surface and returning your stainless steel to its original lustrous look, feel and finish.

Rust Remover is suitable on surface rust and lime deposits. Touch-up cleaning with Rust Remover promotes rapid regeneration of the chromium oxide layer that protects the surface and with a pH of 0, this acidic formulation is able to assist in the removal of bacteria and germs. Download data sheet.

Grease Remover 430.

Grease can be tough to remove from any surface, including stainless steel, but Avesta's OriginalFinish Grease Remover was developed specifically to cut through grease, returning your steel to its original lustrous look, feel and finish. OriginalFinish Grease Remover is suitable for a variety of applications, including kitchens, cladding, clean rooms and appliances.

Regular cleaning with OriginalFinish Grease Remover promotes rapid regeneration of the chromium oxide layer that protects the surface. Plus, with a pH of 12, this alkaline formulation is able to assist in the removal of bacteria and germs. Download data sheet.

Finger Print Remover 420.

Fingerprints are an ongoing challenge on bright, polished stainless steel, and Avesta's OriginalFinish Fingerprint Remover eliminates them with ease, returning your stainless steel to its original lustrous look, feel and finish. While OriginalFinish Fingerprint Remover works quickly and easily on everyday fingerprints, a pre-cleaning with OriginalFinish Grease Remover may be required for stainless steel surfaces with heavy grease or if oil-based cleaners need to be removed.

OriginalFinish Fingerprint Remover is suitable for a variety of applications, including cladding, kitchens and clean rooms. With no oil or wax additives to attract dirt and bacteria, OriginalFinish™ Fingerprint Remover leaves no streaks or stains. Download data sheet.

Spray Pickle Pump SP 25.

The Avesta Spray Pickle Pump is a low-pressure membrane pump made of acid resistant parts adapted for spraying pickling gels and chemicals.
Download data sheet

Moly Drop Test 960

Avesta Moly Drop Test 960 is an easy to use chemical test that helps differentiate 304 grade stainless steel from 316 grade stainless steel. With this simple chemical test you can check if your stainless steel is 304 or 316. The test will identify the grade within 5-10 minutes through a colour change.
Download data sheet.

Neutralizing Agent 502.

Neutralizing agent provides a simple method for handling the acidic waste water, by adding this product to the water after rinsing. This will give the waste water an adjusted Ph value of 7 to 10 and dissolved metals such as chromium and nickel will be precipitated. Download data sheet.

First Aid Spray

This first aid spray should be available in work places where Avesta Pickling Paste/Gel/Spray is handled. In the event of an accident when using Avesta pickling Chemicals quickly rinse the effected area with the First Aid Spray, to absorb all harmful components from the Pickling chemical to prevent serious skin damage Download data sheet.

BlueOne 130

Pickling Paste 130 is a unique patented pickling paste that creates a better working environment. BlueOne makes it possible to pickle virtually without the toxic nitric fumes that are normally formed during pickling. BlueOne 130 is heat-stable and can be used in warmer climates. BlueOne 130 is a universal paste that can be used on all stainless steel grades. Download data sheet.

RedOne 140

Pickling Paste 120 is a non-toxic paste, which makes it possible to pickle welds on bright cold rolled surfaces (2B) in steel grades such as EN 1.4301 (304) without damaging the finish. Download data sheet.

Bath Pickling

Avesta Bath Pickling is used to restore larger stainless steel surfaces that have been damaged by working operations such as welding, forming, cutting and blasting. The pickling bath also removes welding oxides, the underlying chromium-depleted layer, micro-slag particles and other contaminants that may cause local corrosion. To assist pickling, this process may sometimes be combined with some form of simultaneous mechanical treatment, for example brushing. After pickling, the workpiece should be thoroughly rinsed with clean water. The best results are achieved by using a high-pressure water jet. Download data sheet.

Spray Pickle Gels

Avesta spray pickle gels are used to restore larger stainless steel surfaces that have been damaged by working operations such as welding, forming, cutting and blasting.

The spray pickle gel also removes welding oxides, the underlying chromium-depleted layer, micro-slag particles and other contaminants that may cause local corrosion. To assist pickling, this process may sometimes be combined with some form of simultaneous mechanical treatment, for example brushing Download data sheet.

101 Original Pickle Paste

Avesta Classic Pickling Paste 101 is used to treat stainless steel surfaces that have been damaged by working operations such as welding, forming, cutting and blasting. It removes welding oxides, the underlying chromium-depleted layer, micro-slag particles and other contaminants that may cause local corrosion. This paste is specifically intended for standard brush pickling of weld seams and smaller surfaces. data sheet.

120 Green Pickle Paste

Avesta GreenOne™ Pickling Paste 120 is intended for both the soft brush pickling of weld seams and smaller areas to preserve bright finishes after fabrication and heavy duty maintenance cleaning, rust removal on corrode stainless steel surfaces in service. data sheet.

601 Nitric Passivator

Avesta Passivator 601 is intended for use after mechanical descaling treatment of stainless steel such as grinding, polishing and blasting. These processes leave a surface which, because of remaining grinding dust and iron particles, is sensitive to corrosion. The product also restores the protective chromium oxide layer.data sheet.